China Emulsion Filter Lubrication filtration machines
China Emulsion Filter Lubrication filtration machines
- Detail
- Parameters
Copper Emulsion Filter
Saham's copper emulsion filter with special water –outlet design to reduce the impact of the filter cloth, electro- mechanical control automatic cloth, stainless steel network design is convenient and easy to use ,which is the guarantee for producting good quality copper wire, advantages are as below:
| 1 | Keep the emulsion clean and free of spoilage; |
| 2 | Remove copper powder in emulsion and prolong die life, |
| 3 | Reduce the wear and prolong the life of the drum. |
| 4 | Reduce the breakage rate and increase the output |
| 5 | gravity reflow can be used without the use of additional emulsion pumps to save electricity |
| 6 | With stainless steel chain network transmission, the tension of the filter cloth is always consistent and the cloth is smooth and unwinding |
| 7 | Control the cloth automatically and save the cost of the filter cloth |
| 8 | Reduce the blockage of the plate heat exchanger and avoid cleaning of heat exchangers frequently |
Technical parameters of SAM-FT series emulsion filter
1、Adapted work: Clean and filter for lubricating fluid ofprocessing copper wire
2、Filtering accuracy: 10-50um (depend on the type ofcloth)
3、Filtering mode: the chain network transmission is fullyautomatic.
4、Filter cloth take-up: equipped with waterlevel induction, chain and gear are synchronized.
5、BONFIGLIOLI motor is from Italy,applicable voltage380V±10%，motorprotection grade IP55.
Main Technical Parameters
We can provide various types of copper emulsion filters, main technical parameters are as follows:
SAM-FT-175 | SAM-FT-250 | SAM-FT-500 | SAM-FT-750 | SAM-FT-1000 | SAM-FT-1500 | SAM-FT-2000 | |
flange Diameter | DN65 | DN65 | DN100 | DN150 | DN200 | DN200 | DN200 |
Width of filter cloth(mm) | 500 | 710 | 710 | 1000 | 1000 | 1500 | 2000 |
Motor Power（KW） | 0.12 | 0.12 | 0.12 | 0.18 | 0.18 | 0.24 | 0.24 |
Filtering capacity（L/min） | Max.175 | Max.250 | Max.500 | Max.750 | Max.1000 | Max.1500 | Max.2000 |
CAD DRAWING:
Time of warranty
Time of warrantyof the equipment is from completion of the debug within one year,the damage caused by wear parts and non sellers'reason are not within the scope of warranty.
Time of delivery Terms of payment
30 days after payment T/T ; Western Union；
Feedback picture from our customer:
